About specAmotorCalculation MethodConstruction Motors
This Motor
MySpec! Login
Email :
Password :
Remember Me
Forgot Password | Register

   Bookmark this datasheet Bookmark this datasheet

U9M4HT/forced air Electric Motor Datasheet


Manufacturer typenumberU9M4HT/forced air
Manufacturer brandDanaher
Commutationbrush
Short description of the motorpancake motor-equivalent Platinum model U9DT-A. B or C

Performance data

Maximum rated output power motoraxisPrated [W]159.000
Nominal terminal voltageUnom [V]29.900
Maximum rated currentImax [A]72.000
Maximum rated torque at standard temp.22 oCTmax [Nm]4.730
Motorconstant at standard temp. 22 oCk [Vs/rad or Nm/A]6.570e-2
Maximum torque at standstill at nominal voltageTstall [Nm]2.279
Maximum theoretical velocity motoraxis at no load (and no friction of motor and reduction) and nominal voltageω0 [rad/s]455.099
Maximum allowed velocity motoraxisωmax [rad/s]628.319
Maximum voltage allowed to prevent sparking due to brushed commutationUmax [V]29.900
Maximum output power equal to 1/4Tstallω0Pmax [W]262.944

Mechanical data

Inertia of rotorJrotor [kgm2]5.900e-5
Maximum acceleration at standstill if no load or reduction is attachedmax. accel [rad/s2]3.863e+4
Constant friction torque of motor on motoraxisTfric [Nm]0.032
Velocity-dependant friction torque of motor on motoraxisCv [Nm/rad]8.590e-5
Mechanical timeconstantτmech [s]1.162e-2

Electrical data

Resistance windings at standard temp. 22 oCR [Ω]0.850
Winding inductance measured at terminals of motorL [H]1.000e-4
Slope of the motorS [Nms/rad]5.078e-3
Electrical timeconstantτelec [s]1.176e-4

Thermal data

Maximum allowed temperature of windingsΘmax [oC]150.000
Maximum continuous current (thermal limit) at surround temp. 22 oC and at stillstandImax, thermal [A]17.694
Thermal resistance between rotor and ambientRth,total [K/W]0.320

Magnet data

the material of the magnetmagnetmaterialunknown
degrading of the magnetic flux density in percent per oC or KTKBr [%/K]-2.000e-2

Remarks:

  1. Cth,total is not provided. This means that the time when thermal stability occurs can not be calculated.
  2. The heatsink used for this motor is 8''x16''x3/8'' Alu

The quality and completeness of the supplied information has quality index: B

This quality index is determined by specAmotor.com. Here is described what the quality index is.


Advertisement