This Motor

Datasheet motor

MySpec! Login

U9M4LR/forced air Electric Motor Datasheet
| Manufacturer typenumber | U9M4LR/forced air | ||
|---|---|---|---|
| Manufacturer brand | Danaher | ||
| Commutation | brush | ||
| Short description of the motor | pancake motor-no equivalent Platinum model specified by vendor | ||
Performance data | |||
| Maximum rated output power motoraxis | Prated [W] | 101.000 | |
| Nominal terminal voltage | Unom [V] | 12.600 | |
| Maximum rated current | Imax [A] | 137.000 | |
| Maximum rated torque at standard temp.22 oC | Tmax [Nm] | 3.178 | |
| Motorconstant at standard temp. 22 oC | k [Vs/rad or Nm/A] | 2.320e-2 | |
| Maximum torque at standstill at nominal voltage | Tstall [Nm] | 0.773 | |
| Maximum theoretical velocity motoraxis at no load (and no friction of motor and reduction) and nominal voltage | ω0 [rad/s] | 543.103 | |
| Maximum allowed velocity motoraxis | ωmax [rad/s] | 628.319 | |
| Maximum voltage allowed to prevent sparking due to brushed commutation | Umax [V] | 12.600 | |
| Maximum output power equal to 1/4Tstallω0 | Pmax [W] | 108.740 | |
Mechanical data | |||
| Inertia of rotor | Jrotor [kgm2] | 4.000e-5 | |
| Maximum acceleration at standstill if no load or reduction is attached | max. accel [rad/s2] | 1.932e+4 | |
| Constant friction torque of motor on motoraxis | Tfric [Nm] | 0.028 | |
| Velocity-dependant friction torque of motor on motoraxis | Cv [Nm/rad] | 4.770e-5 | |
| Mechanical timeconstant | τmech [s] | 2.713e-2 | |
Electrical data | |||
| Resistance windings at standard temp. 22 oC | R [Ω] | 0.365 | |
| Winding inductance measured at terminals of motor | L [H] | 2.500e-5 | |
| Slope of the motor | S [Nms/rad] | 1.475e-3 | |
| Electrical timeconstant | τelec [s] | 6.849e-5 | |
Thermal data | |||
| Maximum allowed temperature of windings | Θmax [oC] | 150.000 | |
| Maximum continuous current (thermal limit) at surround temp. 22 oC and at stillstand | Imax, thermal [A] | 28.867 | |
| Thermal resistance between rotor and ambient | Rth,total [K/W] | 0.280 | |
Magnet data | |||
| the material of the magnet | magnetmaterial | unknown | |
| degrading of the magnetic flux density in percent per oC or K | TKBr [%/K] | -2.000e-2 | |
Remarks:
- Cth,total is not provided. This means that the time when thermal stability occurs can not be calculated.
- The heatsink used for this motor is 8''x16''x3/8'' Alu
The quality and completeness of the supplied information has quality index: B
This quality index is determined by specAmotor.com. Here is described what the quality index is.
Advertisement







